More Offers ⨯
IN THE BOX | |
---|---|
Sales Package | Amplifier and User Documentation |
General | |
---|---|
Brand | Emotiva |
Model | XPA HC-1 |
Color | black |
Specifications | |
---|---|
Circuit Topology | The XPA HC-1 is a monoblock audio power amplifier, with a fully discrete, dual differential, high current, short signal path Class A/B amplifier section, Optimized Class Hâ„¢ power supply topology, and microprocessor-controlled fault protection The XPA HC-1 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS) |
Audio Specifications | The XPA HC-1 features a single High-Powered Single Channel Amplifier Module |
Audio Specifications | Power Output: 300 watts RMS; 20 Hz – 20 kHz; THD <0.1%; 8 Ohms. 600 watts RMS; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms. Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB). Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB. THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms. Signal to Noise Ratio (8 Ohm load): > 120 dB; ref FTC rated power; unbalanced input (A-weighted). > 95 dB; ref 1 watt; unbalanced input (A-weighted). Minimum Recommended Load Impedance: 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads). Damping Factor (8 Ohm load): > 500. Input Sensitivity (for rated power; 8 Ohm load): 1.7 V. Gain: 29 dB. Input Impedance: 33k Ohms (balanced). 23.5k Ohms (unbalanced). |
Input And Output Connections | Input Connections: Unbalanced (RCA); balanced (XLR); independently selectable. Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts. Trigger: Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 120 mA. |
Power Requirements | Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected) |
Front Panel Controls and Indicators | Standby: push button (halo ring changes color to indicate Standby or On). Status LED: one; blue. Status LED changes to red to indicate a fault condition |
Rear Panel Controls | AC Power switch: rocker switch (switches AC main power). Status LED switch: disables front panel Status LED and dims Standby button halo. Input selector switch: metal toggle switch; selects between balanced and unbalanced input. Circuit Breaker: press button to reset the circuit breaker. |
Protection | The XPA HC-1 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions |
Dimension | |
---|---|
Dimension | 8-3/8†wide x 7-5/8†high x 19†deep (unboxed; including feet and connectors). 8-3/8†wide x 7†high x 18†deep (unboxed; without feet). 24-3/4†wide x 12†high x 14-1/2†deep (boxed). |
Weight | 21.5 lbs (unboxed) 28 lbs (boxed) |
Warranty | |
---|---|
Warranty Type | Manufacturers |
Warranty Period | 5 Years |