More Offers ⨯
IN THE BOX | |
---|---|
Sales Package | Crestron AV3 3-Series Control System and User documentation |
General | |
---|---|
Brand | crestron |
Model | AV3 |
Year | |
Color | black |
Dimension | |
---|---|
Height | 3.47 in (89 mm) without feet |
Width | 17.28 in (439 mm); 19.00 in (483 mm) with rack ears |
Depth | 10.06 in (256 mm) |
Weight | 4.0 lb (1.9 kg) |
Specifications | |
---|---|
Control Engine | Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs |
SDRAM | 1 GB |
Flash | 4 GB |
Memory Card | Supports SD and SDHC cards up to 32 GB |
External Storage | Supports USB mass storage devices up to 1 TBSupports USB mass storage devices up to 1 TB |
Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client |
Control Subnet | 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode |
Cresnet | Cresnet master mode |
USB | Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port |
RS-232/422/485 | For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 |
IR/Serial | Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
Temperature | 41° to 113° F (5° to 45° C) |
Humidity | 10% to 90% RH (non-condensing) |
Heat Dissipation | 45 BTU/hr with no Cresnet devices, no control cards; 71 BTU/hr with full Cresnet load, no control cards; See individual control card spec sheets for additional specifications |
Chassis | Metal, black finish, vented top and sides |
Faceplate | Extruded metal, black finish, polycarbonate label overlay |
Mounting | Freestanding or 2 RU 19-inch rack-mountable (adhesive feet and rack ears included) |
Main Power | 2.4 Amps @ 100-240 Volts AC, 50/60 Hz |
Available Cresnet Power | 75 Watts (3.125 Amps @ 24 Volts DC) |
Connectors and Card slots | |
---|---|
S1 – S3 | (3) 3-Series control card expansion slots (optional)[3] |
COM 1 – 2 | (2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232/422/485 ports [4]; Up to 115.2k baud; hardware and software handshaking support |
COM 3 – 6 | (4) 3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports [4]; Up to 115.2k baud; software handshaking support |
IR - SERIAL OUTPUT 1 – 8 | (2) 8-pin 3.5 mm detachable terminal block; Comprises (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
RELAY OUTPUT 1 – 8 | (2) 8-pin 3.5 mm detachable terminal blocks; Comprises (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
LAN | (1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4]; Connects to the customer's LAN |
CONTROL SUBNET | (1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4]; Provides a dedicated local network for Crestron devices |
USB | (1) USB Type A female; USB 2.0 port for storage devices |
MEMORY | (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansion |
I/O 1 – 8 | (1) 9-pin 3.5 mm detachable terminal block; Comprises (8) "Versiport" digital input/output or analog input ports (referenced to GND) [4]; Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1; Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled; Programmable 5 Volts, 2k Ohms pull-up resistor per pin |
NET | (1) 4-pin 3.5 mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices [4]; See "Power" section for additional specifications |
100-240V~2.4A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
G | (1) 6-32 screw; Chassis ground lug |
COMPUTER (front) | (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only |
Controls and Indicators | |
---|---|
PWR | (1) Green LED, indicates operating power supplied from AC line |
NET | (1) Amber LED, indicates communication with the Cresnet system |
MSG | (1) Red LED, indicates control system has generated an error message |
HW-R | (1) Recessed pushbutton for hardware reset |
SW-R | (1) Recessed pushbutton for software reset |
CNPS FAULT | (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication |
SLOT 1 – 3 | (3) Green LEDs, indicate control cards are inserted in the corresponding slots [3] |
LAN (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity |
CONTROL SUBNET (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity |
Warranty | |
---|---|
Warranty Type | Official manufacturer warranty |